Haier HWD80-BP14636N Manuel D'utilisation page 12

3- Control panel
6+6kg
Delay
3-6
Intense 5+5 kg Delay
Speed up
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3-7
Start/Pause
3-8.1
Temp.
Speed
3-8.2
12
3.5.5-Function "Speed up"
3-5.5
This function saves time and energy. It is preferable if
clothes is slightly wetted. Press simultaneously button
"6+6 kg." and "Delay" (Fig. 3-5.5) for about 3 seconds
to activate the "Speed up" function;
played. This function is not available in all programmes
(see PROGRAMMES).
3.6- "Delay" button
Press this button (Fig. 3-6) to start the programme
with a delay. End time delay could be increased in steps
6:30 means end of programme cycle will be in 6 hours
and 30 minutes. Press "Start/Pause" button to activate
the time delay. It is not applicable to programme SPIN.
Start/Pause
3.7- "Start/Pause" button
Press this button (Fig. 3-7) gently to start or inter-
rupt the currently displayed programme. During pro-
gramme setting and during programme run the LED
above the button is shining, or if interrupted blinking. .
3.8 Child lock
5+5 kg
Steam
Press button " Temp." and "Steam" for 3 seconds si-
multaneously (Fig. 3-8.1) to block all panel elements
against activation. For unlocking please press again
Speed up
the two buttons.
The display shows cLo
pressed, when the child lock is activated. The change
is not running.
SPEEd uP
(Fig. 3-8.2) if a button will be
I -
EN
is dis-