Troubleshooting Information - Toyota R01 Manuel Du Propriétaire

TROUBLESHOOTING INFORMATION

NOTE
• To check and/or change the device's settings, make sure that
the device is connected to the Smartphone App.
• If you encounter a problem you cannot solve, contact an
authorised service centre for assistance.
Question
The device does not power
on.
No beep sound when the
device power on or press
the button.
Why is my GPS not
working?
Answer
• Check the Power LED (on or off).
Off Press and hold the Power
button for 2 seconds to power on.
• Check the vehicle ignition (on or
off).
If Off Turn on the vehicle
ignition.
• Remove the microSD card and try
again. Format the card or replace
with a new card.
• Reset the device by inserting a
small rod (such as a straightened
paperclip) into the Reset button.
• Check if Beep sounds are enabled
(ON) via Smartphone App.
If Off Please turn it on.
• Reset the device by inserting a
small rod (such as a straightened
paperclip) into the Reset button.
• Move your car outdoors and wait
for about 10 minutes to fix the
position. You can have the better
GPS signal under clear sky.
• If the car's windscreen is tinted
with a reflective coating, it may
be athermic and impact the GPS
reception. In this instance, please
mount the device where there is a
"clear area."
35
Reset button