Firmware Update - Toyota R01 Manuel Du Propriétaire

5. FIRMWARE UPDATE

MicroSD CARD FIRMWARE UPDATE
1. Insert your MicroSD card (lower than 32GB) into a card reader/
adaptor and connect to your PC.
2. Delete any files and folders off the MicroSD card (format) so
that it's blank.
3. Download the latest version of software.
4. Copy & paste the SD_CarDV.bin file onto the blank Micro SD
card.
5. Insert the MicroSD card in the Dashcam and start your
vehicle (engine running) to start firmware update. Wi-Fi LED,
Microphone LED, and Action LED will light up and flash in an
anti-clockwise sequence during the update process.
NOTE
• Please note this can take a few minutes to complete.
6. Once the Firmware update is complete, the Dashcam will restart
automatically. Once Dashcam is back to normal recording state,
please connect to the Dashcam via the Smartphone App and
format the MicroSD card via the settings menu.
APP OTA FIRMWARE UPDATE
Android
1. Please follow the steps above to connect to App.
2. Select "My Tool – Firmware Update – Turn off the Wi-Fi (use your
own internet) – Firmware Update".
3. Select "Download", it will start download the firmware to your
phone automatically.
4. Back to home page, then drag to connect.
5. Select "Firmware update – upload now". It will start upload the
firmware from the phone to your device automatically.
6. Once upload finished, the device will start update firmware. Wi-
Fi LED, Microphone LED, and Action LED will light up and flash
in an anti-clockwise sequence during the update process.
NOTE
• Please note this can take a few minutes to complete.
7. Once the Firmware update is complete, the Dashcam will restart
automatically. Once Dashcam is back to normal recording state,
please connect to the Dashcam via the Smartphone App and
format the MicroSD card via the settings menu.
33