Integrated Dashcam Operation; Inserting The Microsd Card; Removing The Microsd Card - Toyota R01 Manuel Du Propriétaire

20

INTEGRATED DASHCAM OPERATION

The Dashcam records video, audio and location data from GPS
into the microSD card while driving. With the viewer software
dedicated for this Dashcam, video and audio can be played back
as well as checking the location data of the driven route with the
help of GPS co-ordinates. This section describes the procedure to
use the Dashcam.

1. Inserting the microSD Card

The Dashcam will not function without a microSD card. If a
microSD card is not inserted, the Dashcam will not record video.
Instead, it will give you a continuous audio/visual warning on
vehicle startup until a card is inserted. Follow instructions below to
either insert or remove the microSD card.
1. Slide the microSD card inwards to attach it to the microSD card
holder. Observe markings on holder for correct orientation.
2. Insert the microSD card into the microSD card slot.
3. Close the microSD card slot cover.
1
NOTE
• Confirm that the Dashcam power is off (LED is off ). Do
not insert a microSD card while the Dashcam is running.
Otherwise, the microSD card may get damaged.
• When attaching a microSD card to the microSD card holder,
check the direction of the card and then slide it into the slot
following the markings on the holder.
• Close the microSD card slot cover securely to make sure that
the microSD card is inserted correctly.

2. Removing the microSD Card

To view the recorded videos on a computer, first confirm that the
Dashcam is OFF (no LEDs), then remove the micro SD card.
1. Open the microSD card slot cover.
2. Gently pull the cover to remove the microSD card with the
holder.
2 3