32
Parking Mode
Detection
Auto Override Parking
Files
G-Sensor Sensitivity
Security LED Indicator
System
Date / Time
Microphone Settings
Speed Units
Storage Allocation
GPS Log
My password
System Reset
Format SD card
Restore to Defaults
When enabled, the Dashcam will power up
and start recording if an impact is detected,
if the vehicle battery condition allows.
<On> / Off
<On> / Off
Sets the sensitivity level of the G sensor that
allows automatic triggering of the parking
recording when the Dashcam is in the
Parking mode.
Low / <Medium> / High
Turns on or off the flashing red LED
indicator next to the camera lens, during
Parking Mode.
Sets the system date and time.
Sets the microphone function in the
Normal/Emergency Mode, Follow Me Home
Mode, Parking Mode and Adventure Mode.
Always On at Start Up / <Always Off at Start
Up> / Remember Previous State
Sets the preferred speed unit.
KMH / <MPH>
The system provides 4 default memory
configurations to store the videos and
photos. Select the proper configuration
based on your usage.
Turns on or off the GPS logging function.
On / <Off>
Sets the Wi-Fi password.
Formats the memory card.
(All data will be erased.)
Restores the system settings to the factory
defaults.