Télécharger Imprimer la page

GYS BATIUM 25/24X Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Translation of the original instructions
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on
our website (see cover page).
Disposal:
• This product should be disposed of at an appropriate
recycling facility. Do not dispose of in domestic waste.
GENERAL DESCRIPTION
BATIUM 25/24X is designed to charge 6V, 12V and 24V batteries. It has 3 functions:
- The IUoU charging curve allows to charge lead acid batteries, with liquid or gel electrolyte, from light vehicles to
heavy goods vehicles with a battery capacity of 35 Ah to 350 Ah.
- The IUIo charging curve allows to charge open lead traction batteries (e.g. for forklifts, floor sweepers...), from
35 Ah to 180 Ah capacity.
- The «Voltage measurement» function is used to measure the voltage of the alternator, starter or battery.
CONNECTION AND GENERAL OPERATION (p.2)
Precaution: Check the electrolyte level.
Fill it up if necessary, before starting the charge.
Connect the clamps: red clamp on the + terminal of the battery and black clamp on the - terminal.
Connect the charger:
1
- Directly to the battery, using the charger's standard clamps.
- or the device's specific connector, by replacing the clamps with a dedicated connector while observing the
correct polarity and current .
2
Connect the charger to the 230 V mains.
3
Set the switch to «ON» (back of the product). The display and all the keypad LEDs light up.
Choose the charging curve (5):
4
- IUoU for automotive batteries,
- IUIo for traction batteries.
Select the battery voltage 6 V /12 V / 24 V (4) according to the recommendation features on the battery or
according to the battery coupling (series or parallel cf p.2).
5
Risk of explosion or acid splash in case of incorrect voltage selection (24V for a 12V battery).
6
Choose the charging rate, according to the capacity (Ah) written on the battery (6).
IUoU
Before starting the load, the Batium performs the following operations:
a - It analyses the battery: voltage/battery status.... Batium indicates any anomaly (see table «Anomalies,
7
causes, remedies»).
b - It recovers the battery when the voltage is too low.
BATIUM 25/24X
7 A max
15 A max
25 A max
35
95
200
95 Ah
225 Ah
350 Ah
7 A max
8h
IUIo
90 Ah
14h
EN
15 A max
25 A max
90
120
45
150 Ah
180 Ah
11

Publicité

loading