Autosen AP016 Notice De Montage page 11

4 Functions
Current output 4...20 mA
MAW
P = system pressure,
MAW = Initial value of the measuring range,
MEW = final value of the measuring range
In the measuring range the output signal is
between 4 and 20 mA.
If the system pressure is above or below
the measuring range, the analogue output
behaves, without achieving the accuracy,
as follows:
• System pressure above the measuring
range: 20...25 mA.
• System pressure below the measuring
range: 4...3 mA.
5 Installation
Before installing and removing the unit: make sure that no pressure is
applied to the system.
► Insert the unit in a G ¼ process connection.
► Tighten firmly. Recommended tightening torque:
Pressure range in bar Tightening torque in Nm
6...400
Depends on lubrication, seal and pressure load!
MEW
25...35
UK
11