ENGLISH
Turning off
Hold down the Start/Pause button on the robot vacuum cleaner to turn it off.
Warning
If you are not going to use the robot vacuum cleaner for an extended period of time, it is
advisable to leave it switched off until new use.
Cleaning modes
The robot vacuum cleaner includes different modes and functions that can be toggled from
the app.
Automatic mode
-
Press the Start/Pause button or select the auto cleaning mode on the app, then the robot
vacuum cleaner will start the automatic cleaning.
-
The robot vacuum cleaner will clean the whole surface, edges, around objects such as
tables, chairs etc., until the battery is low, after which it will return to the self-emptying
base.
Random mode
-
The robot vacuum cleaner will clean randomly until the battery percentage is low and it
will return to the self-emptying base.
-
To activate this mode, press the random cleaning button on the app.
Scrubbing mode. Fig. 7.
-
Fill the water tank.
-
Attach the mop to the bracket and the latter to the mixed tank.
-
Place the mixed tank on the robot vacuum cleaner and select the scrubbing level on the
app. There are three scrubbing levels: Low, Medium, High.
-
Once you have selected the desired scrubbing level on the app, the robot vacuum cleaner
will start the All in One function to vacuum, scrub, and sweep simultaneously thanks to its
mixed tank.
Note
-
If you wish to mop, do not fill the water tank.
-
When the robot vacuum cleaner has the mixed tank with water in it, it will rotate on its own
to dampen the mop as it leaves the base.
-
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
-
It is recommended to be present when the robot vacuum cleaner is scrubbing.
-
When the robot vacuum cleaner returns to the self-emptying base, the mop must be
removed. Do not leave the robot vacuum cleaner charging with the mop assembled.
52
CONGA 2299 ULTRA HOME VITAL
Spiral mode
When you select this mode, the robot vacuum cleaner will intensively clean a specific spot at
maximum power. It will start cleaning at a specific spot and will move outwards in a spiral
motion (1 metre). Then, it will return to the starting spot in an inwards spiral motion again.
-
Before using this mode, place it in the spot you wish to clean.
-
When it finishes and returns to the starting point, the robot vacuum cleaner will stop at the
same point where it started cleaning.
-
To activate this mode, press the spiral cleaning button on the app.
Edge mode
-
When this mode is selected, the robot vacuum cleaner will clean along walls and around
furniture (e.g., table or chair legs).
-
Press the edge cleaning button on the app.
Back Home mode
Press the Back Home button on the robot vacuum cleaner or select the option from the app
(house icon) to send the robot vacuum cleaner to the self-emptying base. The robot vacuum
cleaner will stop vacuuming until it reaches the base.
Manual mode
Select the manual cleaning mode on the app to steer your robot vacuum cleaner manually.
Power level function
Select the power level on the app to control the robot vacuum cleaner's suction power during
cleaning. There are 3 power levels: Eco, Normal, and Turbo.
Cleaning scheduling
To make cleaning easier, the robot vacuum cleaner has a function that allows it to be
programmed daily from the app. According to the setting, the robot vacuum cleaner will
automatically start cleaning in the selected days at the desired time.
5. CLEANING AND MAINTENANCE
High-efficiency filter. Fig. 8.
-
The high-efficiency filter is designed with fibres that help trap dust particles, dust mites,
pollen... It is very important to periodically clean the filter, to avoid these particles from
building up in the filter, causing efficiency loss. It is convenient to carry out this maintenance
once a week.
-
It is recommended to replace the high-efficiency filter with a new one without exceeding
160 cleaning hours.
ENGLISH
53
CONGA 2299 ULTRA HOME VITAL