Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
(1) The washing program used to test wash performance is: Eco 40-60.
(2) The special anti-allergy steam and special baby clothing steam programs are both suitable
for sterilising colourfast clothes. If you see any vapour on the door, do not touch it or open
the dispenser drawer. This may result in burns.
(3) The Eco 40-60 program is suitable for washing normally soiled cotton laundry that is
resistant to washing temperatures of 40°C and 60°C in the same wash cycle.
Add the washing products, close the door and select the program
•
Load the laundry to be washed in the drum and close the door. Add the washing products to
the corresponding compartments according to the type of program you want to select. Add
the washing products as described in the Washing products section of the User Manual.
1.
Press the «On/Off» button.
2.
Turn the program selector knob to the program you want. By default, it is set to the
«Cotton» program.
3.
Select the washing temperature, the spin speed and the number of additional rinses by
pressing the «Temp.» and «Spin» buttons.
4.
Press the «Options» button to select other functions.
5.
After starting the program, the display shows the program duration (hours: minutes),
number of rinses, wash temperature and the additional optional functions, in this order.
Selecting additional functions
•
In standby mode, press the «Options» button to select an additional function to be added
to the current program. Select only one function with each press. The corresponding icon
starts flashing. After launching the program, it can no longer be modified.
Prewash
•
Select this function to start the pre-wash cycle in order to boost the cleaning effect and
remove the toughest stains. This function is suitable for heavily soiled clothes.
•
Before starting the cycle, you can add washing products to the pre-wash compartment
and you must put some in the main wash compartment.
Intensive
•
This function extends the washing time, to wash in greater depth and to remove stains
more effectively.
Extra rinse
If you select the extra rinse function, the machine will start the rinsing process again before
switching to the softener program and the total running time of the cycle will increase
accordingly.
Water inlet warning
•
If the water inlet tap is not open or the water pressure is too low, you will be alerted by
the water inlet error icon and the error code «F01» appearing on the display.
18
EN
Publicité
