Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
4.
To make the machine safe and reduce noise, plug the holes using the plastic caps provided
(see appendix provided with the machine). Push the plugs into the holes and turn them
in the direction indicated by the arrow until they click into place.
Important: Keep the transit bolts and the spanner. They must be put back in position
when transporting the washing machine. To refit them, repeat this procedure in
reverse.
Levelling
The washing machine should be installed on a firm, level surface (use a spirit level if necessary).
If you want to install the washing machine on a wooden floor, spread the weight by placing a
60x60 cm plywood board, that is at least 3 cm thick, under the machine and secure the board
to the floor. If the ground is uneven, adjust the four adjuster feet as needed; do not insert
wooden blocks under the feet.
1.
Unscrew the lock nut by turning it clockwise (see arrow) using the spanner.
2.
Raise the machine slightly and adjust the height of the feet by rotating them.
Lower
Higher
7
EN
Publicité
