4. Connect the light wire and power wire
● After guiding the light wire from the windshield through the body into the front
compartment, insert the windshield frame into the body. Open the front
compartment by removing cover, connect the light wire to the lamp board socket,
connect the power wiring terminal, and stat the car to check if connections are
good. Distinguish left and right rear view mirror then flip them into both sides of the
body.
5. Installation of steering wheel
● First connect the steering wheel cable to the instrument panel, then align the
steering wheel with the connector and insert it. After inserting it to the bottom, the
lock catches on both sides of the connector will lock the steering wheel.
7