Burkert 2000 Guide Rapide page 12

5.4.2 Pressure ranges
Actuator material Actuator size [mm]
PA ø40...ø100
ø125
PPS ø40...ø80
ø100...ø125
Tab. 6: Maximum pilot pressure
5.5 Mechanical data
Actuator size See type label
Installation position any, preferably actuator face up
Materials and ports
see data sheet or operating instructions
english
12
All manuals and user guides at all-guides.com
6
Max. Pilot pressure
6.1
[bar]
10
7 Risk of injury from high pressure and discharge of medium.
▶ Before working on the device or system, switch off the pres-
10
sure. Vent or drain lines.
7
Risk of injury due to improper installation.
▶ Only trained technicians may perform installations.
▶ Perform installations with suitable tools only.
Risk of injury due to unintentional activation of the system and
uncontrolled restart.
▶ Secure plant to prevent unintentional activation..
▶ Ensure that the plant starts up in a controlled manner only.
For control function I: Danger due to the control pressure fail-
ing.
If the control pressure fails, the valve remains in an undefined
position.
▶ For a controlled restart, pressurize the device with control
pressure and then connect the medium.
Type 2000
Installation
INSTALLATION
Safety instructions installation
DANGER!
WARNING!
WARNING!
DANGER!