GiBiDi GROUND 610 Instructions D'installation page 19

GROUND
WARNINGS FOR THE USER
In the event of an operating fault or failure, cut the power upstream of the control unit and call Technical Service.
Periodically check functioning of the safety devices. Any repairs must be carried out by specialised personnel using
original and certified materials
The product may not be used by children or persons with reduced physical, sensorial or mental capacities, or lacking
experience and knowledge, unless appropriately instructed
Do not access the circuit board for adjustments and/or maintenance
ELECTRICAL LAYOUT [
À
Underground motor GROUND610
grey or blue = motor common; brown = opening; black = closing; yellow/green = ground
Underground motor GROUND634
- 2 x 1,5 mm² cable power supply for a cable length of 6 m max., over it's necessary increase the cable
section;
- 0,5 mm² 3-core (3x0,5) cable power supply for a cable length of 6 m max., over it's necessary increase the
cable section.
Á
Control unit cable 3 x1,5 mm²
 Photocell transmitter cable
à Antenna RG58 screened coaxial cable
Ä
Connector block
Å Key selector cable
3 x 0,5 mm²
Æ Flashing light cabl
2 x 1 mm²
Ç Photocell receiver cable 4
È
Domino
TECHNICAL DATA
Operator
Type
Supply voltage
Motor power supply
Power absorbed
Current absorbed (in block)
Max rotation angle
Max angular velocity
90° opening time
Max torque
Capacitor
Operating temperature
Operating frequency (%)
Degree of protection
Encoder / Electrical limit switch
Maximum leaf length
.
[ ]
] [ ] -
1c
1a - 1b
[ ]
1b
power cable 4 x 1 mm²
[ ]
1c
:
,
2 x 0,5 mm²
x 0,5 mm²
.
.
:
GROUND 610
underground electromechanical
220/230Vac 50-60Hz
230Vac
MAX 400W
MAX 3.5A
110°
7°s
13 s
530 N/m
10µF
-20°C + 60°C
30%
IP 67
Electrical limit switch
2.5 m - 600 kg
3.5 m - 400 kg
19
UK
.
GROUND 624
24Vdc
MAX 150W
MAX 5A
110°
7°s
13 s
320 N/m
-
-20°C + 60°C
heavy use
IP 67
encoder
2.5 m - 600 kg
3.5 m - 400 kg