Publicité
Les langues disponibles
Les langues disponibles
EN
NOTE! Make sure that the heater stones do not block the downward movement of the safety
device. Before using the heater test the safety function by pressing the back of the safety
device. You will hear a soft 'click' sound when the safety function is activated.
6. Safety function
Heater Fence
It is necessary for safety and should be constructed of softwood to match sauna interior. See > Image 2. Safety distances
for clearances from sauna heater. Fence should be attached to wall and should not be placed higher than top line of the
heater
Installation of the Control Unit and Sensor
•
Suitable control units > Technical data
•
The control unit includes detailed instructions for fastening the unit on the wall. Please read the instructions of
the control unit.
•
Control unit heater grade setting > Technical data
•
Install the temperature sensor (125 ºC / 257 ºF) delivered as part of the heater package > Image 7. Installation of
the Sensor.
Do not place the supply air vent so that the air flow cools the temperature sensor.
12
TEST
Heater ON
Heater OFF
Publicité
