Publicité
Les langues disponibles
Les langues disponibles
Put the gaskets, front wheel, gaskets and nut into the front axle in turn.
Fix the nut with the M10 wrench and then attach the wheel cover to the wheel.
Place the gear box,rear wheel,gaskets and nut on the rear axle in turn.
Fix the nut with the M10 wrench and then attach the wheel cover to the wheel.
Put the car upside down
Find the main power cord under the seat, and insert the plug of the power cord
into the corresponding socket of the receiver. The plug of the drive motor cable
is docked with the plug on the receiver (the plug on the receiver is not
differentiated left and right).
16
Follow the assembly steps in the order listed below.
Attach the steering wheel.
E
Remove the nut and bolt from the steering wheel.
•
Connect the wires coming from the steering column to the wires on the
•
steering wheel.
Insert the steering wheel over the steering and secure with nut and bolt.
•
Fix the mirror (L/R)
D
Stuck the mirror into the car.
•
Fix the searchlight.
I
Butt and fix the tailstock
•
with the searchlight. Use
M4×12 screws to fix the
inside of the two butted
brackets and snap them
into the car.
17
Publicité
