Costway TQ10120 Instructions De Montage page 11

5) USB port
6) Power display: clearly see the battery power and help judge whether the
battery needs to be charged；
7) Socket: charge
8) Light button: press it to switch the light；
9) Last song/volume-：press it to switch to the last song and long press can
decrease volume；
10) Music Button: press it to play music；
11) Next song/volume+: press it to switch to the next song and long press can
increase volume；
12) Power button: long press for 3 seconds can turn the vehicle on or off; short
press for 1 second can stop the music;
13) High speed button: press it to change the car to the high-speed movement;
14) Low speed button: press it to change the car to the low-speed movement;
15) Wireless Technology: after connected your mobile phone and the wireless
device ,the car can play music from your mobile phone;
16) FM: FM radio;
20
REMOTE CONTROL DIAGRAM
speed
low speed
middle speed
high speed
Long Press: frequency
Press it: Waver
forward backward
Remote control first. When the remote control is on, foot pedal
is not workable
Operation Manual:
Take out the remote control, open the battery compartment on the back of
the remote control and add two AAA LRO3 alkaline batteries. Pay
attention to the polarity of the batteries. When the alignment light and
speed indicator light up, it indicates that the battery installed is correct.
This product does not provide dry batteries.
<Button Description >
(1） Long press on the frequency key(M) 2-4 seconds, Low speed LED
light flashing. Turn on the power of the car, Low speed LED light keep
flashing to long lighting, then frequency bind succeed. If
the frequency bind failed (Low speed LED light flashing) , remove the
battery and repeat steps
P: Press to brake.
S: Speed: press to change speed(low,middle and high speed).
△Forward ▽Backward
Turn left Turn right
emergency brake
Warning
Only used by adults
turn left turn right
21