Tool it DBT 500 Mode D'emploi page 29

User manual
ALTERNATOR TEST
From the [Car] menu, select In Vehicle :
Main Menu
Car Moto
Review Print
Go to Alter nator Test :
In-Vehicle
Battery Test
Start-up test
Alternator Test
The Alternator Test starts with a ripple test, which is performed automatically. Then follow the instructions to obtain an
accurate test result:
RIPPLE TEST
153 mV 14.36 V
After a few seconds, the tester gives the results:
Charging Test
Loaded 14.15 V
14.45 V
Unloaded
126 mV
Ripple
CHARGING NORMAL
Translation of the original
instructions
Battery Location
In-Vehicle
Out-Of-Vehicle
Waveform
Setup
Charging Test
Alternator voltage when the battery is charged
Alternator voltage when the battery is discharged
Undulation
Test result
TESTING
DBT 500
Charging Test
Increase RPM to 2500 and maintain
for 10 seconds, then press ENTER to
continue.
29