Télécharger Imprimer la page

Tool it DBT 500 Mode D'emploi page 24

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
User manual
If the test is performed on a battery in a vehicle (choose In Vehicle), the tester may detect a surface charge
and request that the lights be turned on to remove this surface charge from the battery.
The tester detects when the charge has been removed, and prompts to turn off the lights. Press
nue the test.
Selecting the type of battery from the following:
- Regular battery,
- AGM flat plate
- AGM spiral
- GEL
- EFB.
Standards and ratings
The DBT 500 battery tester assesses each battery according to its respective standards and ratings.
Measurement
standard
measurement
CCA
100-2000 A
BCI
100-2000 A
CA
100-2000 A
MCA
100-2000 A
JIS
26A17-245H2
DIN
100-1400 A
IEC
100-1400 A
FR
100-2000 A
SAE
100-2000 A
USE THE
ARROWS TO SELECT THE CORRECT TEST STANDARD AND RATING. Press
24
Translation of the original
instructions
Battery Test
Start-up test
Alternator Test
Range of
Cold Cranking Amps, the most frequently used value for
starter batteries at 0°F (-18°C).
International standard from the Battery Council.
Cranking Amps standard, effective value of the starting current at 0°C.
Marine Cranking Amps standard, effective value of the starting current at 0°C.
Japan Industrial Standard, displayed on the battery as a combination of numbers and
letters, for example 55D23, 80D26.
Standard of the German Automotive Industry Committee.
Standard from the International Electrotechnical Commission.
Standard from the European Automobile Industry Association.
Standard from the Society of Automotive Engineers.
In-Vehicle
DBT 500
to conti-
to confirm.

Publicité

loading