Doro 916i cr Mode D'emploi page 10

Hands free function
1.
Press . The Hands free speaker will be activated and the Hands free indicator will
illuminate.
2 . Dial the required telephone number. The speaker volume can be adjusted during a call
using / .
{ }
3 .
Speak towards the microphone located on the front edge of the telephone.
4 . Press to terminate the call.
Please note!
During a conversation, you can switch between headset / hands free mode by picking up
the handset. Replace the handset (or press
Please remember that in Hands free mode it is only possible for one person at a time to
talk. The switch between speaker and microphone is automatic and dependent on the
sound level of the incoming call and the microphone respectively. It is therefore essential
that there are no loud noises, e.g. music, in the immediate vicinity of the telephone, as this
will disrupt the speaker function.
Connecting a headset
You can connect a headset to the socket
When a headset is connected the speaker button
telephone call (equivalent to lifting and putting down the handset).
The volume in the headset can be adjusted during a call using
A neck loop/extra handset can be connected to this socket instead of a headset.
DORO original headsets are tested and adapted for this model. Other types and makes of
headsets may be used, though the function and sound quality cannot be guaranteed. In the
worst case, these could damage the headset and telephone. This type of damage is not covered
by the telephone's guarantee.
Selecting headset or hands free mode
Select headset-/handsfree mode by setting the switch
Please note!
On delivery, the telephone is set to Hands free mode.
The Hands free speaker function will not work when the headset function is activated and
vice versa.
Ringer
The ringer volume, melody and tone can be selected using the switches located on the rear
side of the telephone:
e
n
All manuals and user guides at all-guides.com
=
Ring volume
Ring melody
Ringer tone
English
) to terminate the call.
on the underside of the telephone.
is used to connect /disconnect a
{
=
/ on the back of the telephone.

/ .
}