Publicité
Les langues disponibles
Les langues disponibles
13.
The display shows
14.
Select the desired setting using
Press
.
Q
15.
The display shows
changes.
TONE
PULSE
16.
Select
or
this works in most locations. Press
17.
The display shows
changes.
2
4
TS
18.
Select
,
or
19.
The display shows
changes.
ANSWER&RECORD
20 .
Select
21.
The display shows
changes.
22 .
Use the numeric keypad to enter the default code (0000). Press
Press
.
Q
If the code is not accepted/correct you will hear a short beep, repeat step 21 and 22.
23 .
The display shows
changes.
ON
OFF
24 .
Select
or
The LCD shows "TOTAL:00 NEW:00", which means both the total call and new call counter
ar� z�ro .
Press
anytime to change the settings. Press
w
Number of Rings (Answer delay)
The number of rings before the answer machine answers can be selected between
TS
or
.
TS
With
(Time Saver) selected, calls will be answered after four rings until a new ICM
(incoming message) has been recorded, any subsequent calls will be answered after two rings.
Once these ICM's (incoming messages) have been erased this cycle will be repeated. This
is useful when remotely accessing your unit, if there is no answer after three rings no ICM's
(incoming messages) have been recorded, you can therefore terminate the call before you are
charged.
Pin Code
This code is needed in order to gain access to the remote control functions of the answer
machine (factory setting is 0000). The same code is used for Privacy mode. You can alter the
code according to the description above.
Voice
VOICE
ON
With
set to
VOICE
was recorded. With
still see when the incoming message was recorded in the display.
All manuals and user guides at all-guides.com
English
FLASH
. Press
to change or press
Q
100
/
.
{
}
TONE/PULSE
. Press
using
/
. If unsure about which mode to use, select
{
}
.
Q
ANSWER DELAY
. Press
using
/
. Press
{
}
Q
ANSWER MODE
. Press
ANSWER ONLY
or
PIN CODE
. Press
Q
enter the default code (0000). Press
PRIVACY MODE
. Press
using
/
. Press
{
}
Q
you will be announced the time for when the incoming message (ICM)
OFF
set to
the time and date will not be announced but you can
to continue without changes.
}
270
for AU/UK/EU,
to change or press
or �r���
�r���
Q
to change or press
or �r���
�r���
Q
.
to change or press
or �r���
�r���
Q
using
/
. Press
{
}
to change or press
or �r���
�r���
}
Press
to change or press
or �r���
�r���
Q
.
/ to return to standby.
1
4
600
for FR and
for NZ.
to continue without
}
TONE
to continue without
}
to continue without
}
.
Q
to continue without
. Enter the new code.
Q
to continue without
}
2
4
,
a�
Publicité
