Publicité
Les langues disponibles
Les langues disponibles
Identify the motor guard shown in the image, as well as
5
the red (OFF) and black (ON) buttons. To turn the equip-
ment on again, if the red button is pressed (as shown in
the image), it will be necessary to press the black button.
Note: The motor protection device has a thermal relay
that prevents it from restarting if the temperature of the
device it protects, in this case the motor, has not been
lowered.
Place the hopper (B) on top and x it with the two
7
fasteners (E) leaving a space between the hopper and
the machine to avoid friction during operation.
Waste disposal
Dispose of all waste in accordance with national laws.
General risks
Incorrect use of the machine:
Problem
Not wearing safety
goggles
Crushing explosive
materials
During maintenance
Putting ngers through
the grid
Removing the safety
devices or protective
sheets
24
Danger
Danger of ying
materials
Fire and explosion
hazard
A hand can get caught
in the blades
The blade may catch
clothing or ngers
The mobile parts can
catch clothing, injure
limbs or lead to amputa-
tions
Once the engine guard has been rearmed, t the side
6
guard and secure it with the screws and Allen key Nº
5.
Finally connect the machine and switch it on.
8
Potential risk
Injuries to the eyes
Danger of burns
Danger of serious injury or
amputation
Danger of serious injury or
amputation
Danger of serious injury or
amputation
Mitigation measures
Wear safety goggles
Only use the recom-
mended materials
Disconnect the machine
from the power supply
Check the general safety
guidelines
You must not remove
the protective elements
and safety devices
Publicité
