Publicité
Les langues disponibles
Les langues disponibles
Basic safety guidelines
Security symbols
DANGER
This symbol indicates that there is a potential imminent danger to physical integrity and life. Ignoring the instruc-
tions can lead to serious harmful e ects causing possible injury with danger of death.
WARNING
This symbol indicates that there is a potential imminent danger to physical integrity and life. Ignoring the instruc-
tions can lead to damage to the product and to the user.
INFORMATION
This symbol indicates suggestions and especially practical information can be found below. This symbol indicates
suggestions and practical information for appropriate handling of Master Products equipment. Ignoring this
advice could result in misuse of the article.
User safety
+
The owers to be processed by the machine must only be fresh, either herbaceous and/or semi-woody. Processing of any owers of
a di erent nature can cause injury to the user and the machine. To process dry owers, a speci c barrel is
required. Ask the commercial department of Master Products if you want to trim dried raw material.
When using the machine, wear gloves and safety glasses. Never work with loose clothing, loose hair, bracelets, necklace, etc.
+
+
Never work under the in uence of alcohol and/or drugs.
+
Wear safety glasses to minimize the risk of ying splinters.
Use the machine only if it is in perfect condition, otherwise users will be exposed to risks.
+
+
Safety devices such as switches, grids, guards, racks must not be dismantled under any circumstances.
+
Before carrying out any maintenance action on the machine, it must be switched o and disconnected from the electrical supply.
Who can use the MT Tumbler 500
The MT Tumbler 500 can only be used by people who have read and understood the use and maintenance manual.
If it is used by untrained sta , or it is not used correctly, users will be exposed to unnecessary risks.
Repairing the equipment
Only quali ed sta can dismantle, repair and install new parts. If the product is within its warranty period, only a Master Products
engineer is allowed to make any changes without voiding the warranty.
How to switch o the equipment
The MT Tumbler 500 machine shuts down, under all circumstances, whenever the OFF switch is pressed. Before carrying out any
maintenance work on the machine, it must be switched o and disconnected from the electricity supply.
The grid detector, together with the emergency stop, is only a safety function and must NOT be used as a stop system for the machi-
ne.
The unit must be turned o and disconnected from the power supply in case of abnormal operation..
Disclaimers
Modi cations on Master Products machines without the approval of the manufacturer are forbidden.
The manufacturer withdraws the warranty from any modi ed machine and does not accept liability for any failures and accidents
that may result.
During the warranty period, Master Products machines may only be dismantled and repaired by the manufacturer's engineers or
o cial representatives.
The operator using the machine must check that processed materials are regularly removed. Anything left behind could become
an obstruction and therefore cause the machine to malfunction.
16
Publicité
