Master Trimmers MT Tumbler 500 Manuel D'utilisation Et De Maintenance page 21

Assembling the machine
Tilt the blade back to its original position.
1
Insert the lower protector. Use the metal parts indica-
3
ted in the following image as a reference and support
the ends of the protector against them. Insert the
protector by following a rotating movement on the
lower part of the reel.
Fit the barrel, always holding it with both hands and
5
taking great care not to damage it.
Raise the side protector and secure it with the clip
7
Fix the blade by replacing the di erent elements in
2
this order: washer, spring, female (this must preserve
a space with respect to the spring). Repeat the
process on the other end.
Secure the lower protector, using the fasteners.
4
Reattach the drive belt. Insert it partially and rotate
6
the barrel to ease the strap fully back in place.
Place and secure the hopper with the two faste-
8
ners, leaving a space between it and the machi-
ne to avoid friction during operation.
21