Publicité
Les langues disponibles
Les langues disponibles
en
10
Intended use of the power tool:
Hand-guided oscillator for use without
water supply in weather-protected environ-
ments using the application tools and acces-
sories recommended by FEIN.
– for sawing wood, plastic, glass-fiber rein-
forced plastics (GFRP) and for sawing
sheet metal (max. 1 mm)
– for removing tile joints and rasping or
scraping off tile grout or carpet remain-
ders
Symbols.
Symbol, character
Explanation
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools
moving back and forth.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
AMPShare is the shared battery system that allows you to use many
tools from many professional brands with just one battery.
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by
unintentional starting of the power tool.
Use eye protection during operation.
Wear hearing protection while working.
Use a dust mask during operation.
Use protective gloves during operation.
Switching on
Switching off
Do not charge damaged batteries.
– for sanding or rasping of smaller surfaces
In environments subject to interference, a
reduction of the operating quality is possi-
ble; this can include temporary failure, tem-
porary reduction of the function or the
intended operating behaviour, for the cor-
rection of which intervention by the opera-
tor is required.
Publicité
