Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
Fig.7A
DRIVE LOCKING SCREWS
6 6
A: For wooden windows:
Drive 1/ 2 (12.7 mm) locking screws through the frame
lock and into the sill (Fig.8A). NOTE: To prevent
window sill from splitting, drill 1/8 (3mm) pilot holes
before driving screws. Drive 1/ 2 (12.7mm) locking
screws through frame holes into window sash (Fig.8B).
B: For Vinyl-Clad windows:
Drive 1/ 2 (12.7 mm) locking screws through the frame
lock and into the window sashl (Fig.8B). NOTE: Before
driving the screws, use a drill to drill 5 holes through
the holes in the frame lock and frame extensions into
the windows sash as shown (Fig. 8B).
Fig.8A
C.To secure lower sash in place, attach right angle
sash lock with 3/4" (19mm) or 1
shown(Fig.9).
Fig.7B
D.Cut
space between the upper and lower sashes (Fig.10).
Fig.8B
Fig.9
Window sash seal foam
FOAM SEAL
Fig.10
15
/2" (12.7mm)
screw as
and insert it in the
Publicité
