COOKTOP INSTALLATION
12" [30.5cm] MIN FROM
BOTTOM OF COUNTERTOP
AND ADJACENT CABINET
(RIGHT SIDE)
•
For solid surface material installations such as Surel™ and Corian®, consult with solid surface
manufacturer. Apply heat reflective tape such as Scotch® Aluminum Foil Tape #425 or #427
around the cutout so that it folds over on the top and sides.
•
Do not wrap the tape underneath the cooktop.
•
Be sure the tape extends beyond the outermost flange of the cooktop. All corners should be
covered with tape.
All manuals and user guides at all-guides.com
(CONT.)
THE CONDUIT IS 3 FEET LONG
The junction box must be located where
it will allow sufficient slack in the conduit
for serviceability.
©2018 Hestan Commercial Corporation
EN
7