Publicité
Les langues disponibles
Les langues disponibles
COOKTOP INSTALLATION
Step 2
Place a towel or table cloth onto the counter top. Lay
the cooktop upside down onto the protected surface.
EN
Figure 6
Step 3
A foam tape is provided to seal the cooktop edges to the
countertop. Apply tape approximately 1/16" (1.5 mm)
from the glass edge to the underside of the cooktop
glass. Use tape around the entire glass perimeter. Cut
off excess where tape ends meet.
Figure 7
6
©2018 Hestan Commercial Corporation
All manuals and user guides at all-guides.com
(CONT.)
Step 4
Insert the cooktop centered into the cutout
opening. Make sure the front edge of the counter
top is parallel to the cooktop. Make final check that
all required clearences are met.
Figure 8
Step 5
Four clamp brackets are provided to clamp the cooktop
to the countertop. Tighten screws just enough to hold
brackets in place when cooktop is put into cutout.
Tighten screws securely.
Figure 9
Publicité
