Télécharger Imprimer la page

LGB 24681 Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
Safety Notes
• This model may only be used with the operating system
designed for it.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one power pack.
• Pay close attention to the safety notes in the instructions
for your operating system.
• Not for children under the age of 15.
• WARNING! Sharp edges and points required for operation.
Important Notes
• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• The warranty card included with this product specifies the
warranty conditions.
• Please see your authorized LGB dealer for repairs or
spare parts.
• Disposing: http://www.maerklin.com/en/imprint.html
General Note to Avoid Electromagnetic Interference:
A permanent, flawless wheel-rail contact is required in
order to guarantee operation for which a model is designed.
Do not make any changes to current-conducting parts.
All manuals and user guides at all-guides.com
Functions
• This model is designed for operation on LGB two-rail DC
Service and maintenance
Lubrication
The axle bearings should be lubricated occasionally with a
small amount of Märklin-Oil (7149).
systems with conventional LGB DC train controllers or
power packs (DC, 0 – 24 volts).
5

Publicité

loading