3.0. Use of the Ambu Redi-ACE Collar
Have one rescuer manually stabilize the head and neck, gently holding the head and neck in the
•
neutral alignment position .
Measure the distance between an imaginary plane drawn horizontally and immediately below the
•
patient's chin and second horizontal plane drawn immediately on top of the patient's shoulder .
Compare this distance with the distance from the collar sizing line to the lower aspect of the collar body
•
(not the foam) .
1
Adjust the collar to the appropriate size by pulling the collar apart until the distance between the sizing
•
line and the plastic collar body equals your finger measurement .
If the collar needs to be resized, disengage the locking buttons by pulling up .
•
The collar may now be adjusted to the appropriate size .
•
Engage the locking buttons by pushing down .
•
Wrap the collar around the patient's neck .
•
Secure the collar using the velcro .
•
A nasal airway tubing can be attached to the tube hooks at both sides .
•
4.0. Disposal
Used products must be disposed off according to local procedures .
2
3 4
3
2
5
1
7