Removing Clogs - Panasonic QuickDraw MC-V7319 Manuel D'utilisation

Hose
Tuyau
Manguera

Removing Clogs

The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ Unplug vacuum.
➢ Pull open suction inlet cover and
check for clogging.
➢ Disconnect wand from short hose
and check the wand and hose.
Suction
Inlet Cover
➢ Plug in vacuum cleaner and turn on.
Couvercle
(de l'entrée
d'aspiration)
Cubierta de
➢ Disconnect wand and stretch hose in
aspiración
and out to remove clog.
Short Hose
➢ If clog still exists, turn vacuum
Tuyau court
Manguera
cleaner OFF and UNPLUG POWER
corta
CORD.
➢ Turn vacuum over and inspect
agitator area for clogs.
- 42 -