Removing Clogs - Panasonic MC-UL910 Manuel D'utilisation

Removing Clogs

Hose Inlet
Entrée du tuyau
Conección de
manguera
- 56 -
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢ ➢ Check the handle and extension
wand area.
➢ ➢ Remove handle by pressing handle
quick release button.
➢ ➢ Visually inspect the hose and the
base area into which the hose is
connected.
➢ ➢ Remove any visible clogs.
➢ ➢ Plug in the vacuum cleaner and turn
it on.
➢ ➢ Stretch the hose to maximum length
and then allow the hose to return to
its storage length.
➢ ➢ Turn off and unplug the vacuum
cleaner.
➢ ➢ Remove lower plate. See: "Removing
and Installing Lower Plate"
➢ ➢ Inspect inlet of nozzle hose and clear
any obstructions.
➢ ➢ Remove dust bin and check for
clogs.
➢ ➢ If the dust bin and filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢ ➢ Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.