Publicité
Les langues disponibles
Les langues disponibles
Instruction for rerouting cables hoses and wiring harness:
Throttle cables:
Brake hose :
Cable tie
Clutch cable :
Wiring
:
Make sure that no cable, hose or harness is bended and stays
tension- free over the whole steering angle.
The conversion kit is now completely mounted. Always check local laws and your manufacturer's
warranty conditions for using aftermarket parts on your bike!
Ride safe and have fun!
———————————————————
REV. 00 24/10/2016
Reroute as original. Check throttle cables for free movement on
every steering angle.
Place the brake hose behind the ignition lock and secure it to the ignition lock
support using a cable tie.
Reroute as original.
Move in front of the fork bridge in the direction of travel.
Zubehör von
Brake hose
Ignition lock
Das Original
—
Seite 6 von 9
——
Publicité
