Panasonic KX-HNC600C Guide D'installation page 8

Installation Location
Wireless communication range
The wireless communication range of each device in the system from the hub is approximately
50 m (160 feet) indoors and approximately 300 m (1,000 feet) outdoors. Wireless communication
may be unreliable when the following obstacles are located between the hub and other devices.
R Metal doors or screens
R Walls containing aluminum-sheet insulation
R Walls made of concrete or corrugated iron
R Double-pane glass windows
R Multiple walls
R When using each device on separate floors or in different buildings
Note:
R The camera's LED indicator blinks in red if it is out of range of the hub. In this case, confirm all
connections, including those of the hub.
Information about sensor features
The camera has 2 sensor features that are used for motion detection: a visual sensor and an
infrared sensor (i.e., heat sensor).
Please read the following information before deciding where to install the camera.
Note:
R The camera's sensor features are not designed to be used in situations that require high
reliability. We do not recommend use of the sensor features in these situations.
R Panasonic takes no responsibility for any injury or damage caused by the use of the camera's
sensor features.
Detection method
Visual sensor
The camera detects changes in the images
being displayed.
R The camera detects changes in the
brightness levels of moving objects.
For assistance, visit www.panasonic.ca/english/support
8
HNC600C_(en_en)_0113_ver.201.pdf
Infrared sensor
The camera detects temperature differences
of objects in the images being displayed.
R The infrared sensor uses infrared rays to
detect temperature differences within its
range that are emitted naturally by people,
animals, etc.
8 2017/01/13 11:54:13