Panasonic KX-HNC600C Guide D'installation page 25

Replacing sensor range caps
1
Remove the attached standard cap.
2
Remove the desired sensor range cap from one of the 4 types (A) and attach it to the
sensor (B).
R When attaching, rotate the tab (
according to the type of cap or direction, and attach the cap on the camera, shown in the
following illustration.
2
For assistance, visit www.panasonic.ca/english/support
HNC600C_(en_en)_0113_ver.201.pdf
) on the cap toward the top or at a 45-degree angle
1
1 1
25
Appendix
25
2017/01/13 11:54:14