Panasonic KX-HNC600C Guide D'installation page 3

Accessory information
Supplied accessories
No. Accessory item/Part number
A AC adaptor/PNLV236
B Camera mounting stand
C Wall mounting screws (25 mm (1 inch))
D Suspension wire tool
– Safety wire: 1
– Washers: 2
Small washer for attaching safety wire to camera
ø12 mm (15/32 inches)
Large washer for attaching safety wire to wall
ø16 mm (5/8 inches)
– Screws: 2
Small screw for attaching safety wire to camera
10 mm (3/8 inches)
Large screw for attaching safety wire to wall
25 mm (1 inch)
E Sensor range cap
A B
Additional accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item
*1
DC extension cord
*1 Designed for indoor use only. Do not use outdoors.
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
For assistance, visit www.panasonic.ca/english/support
HNC600C_(en_en)_0113_ver.201.pdf
C D
3
Introduction
Quantity
1
1
4
1
1
E
Order number
PNJA1159Z
3
2017/01/13 11:54:13