Trix V 300 Serie Mode D'emploi page 10

CV Discription
1 7-Bit Adress
2 Minimum speed
3 Acceleration delay
4 Braking delay
5 * Maximum speed
8 Factory Reset / Manufacturer Recognition
17 Extended address (upper part)
18 Extended address (lower part)
29 Bit 0: Travel direction polarity reversal
Bit 1: number of speed levels 14 or 28/128
Bit 2: DCC Operation with braking Block.
DCC-, Selectrix- and DC power Operation
Bit 5: Adress size 7 Bit / 14 bit
51 * Bit 0: Motor polarity reversal
Bit 1: Headlight polarity reversal
Bit 2: Track polarity reversal
902 Sound volume
924 Threshold for braking sounds
* Changes done under Selectrix will automatically be carried out under DCC and vice versa.
** Higher values do not lead to a further increase in speed.
*** The values for the desired settings must be added.
10
All manuals and user guides at all-guides.com
DCC Value
0 - 127
0 - 15
0 - 255
0 - 255
0 - 255
8
CV 29, Bit 5 =1
CV 29, Bit 5 =1
0 / 1 ***
0 / 2
0, 1, 2, 3, 4, 5, 6, 7,
32, 34, 35, 36, 37,
0 / 4
38, 39
0 / 32
0 / 1 ***
0 / 2 0 - 7
0 / 4
0 - 255
0 - 255
Factory-Set SX1 Value
DCC / SX1
3 / 1 0 - 111
0 / — —
5 / 2 1 - 7
3 / 2
125 / 4 ** 1 - 7
125 / — —
255 / — —
255/ — —
6 / — —
0 / 4 4
255 / — —
44 / — —