Bosch GSS 18V-13 Professional Notice Originale page 15

(6) Button for rechargeable battery charge indicator
(7) Battery charge indicator
(8) Pivoting feet
(9) Recess for pivoting feet
(10) Square base plate with clamp fastening
(11) Square foam pad with hook-and-loop fastening
(12) Screws for base plate (x4)
(13) Rectangular base plate with hook-and-loop fastening
(14) Rectangular foam pad
(15) Triangular base plate with hook-and-loop fastening
(16) Triangular foam pad
(17) Handle (insulated gripping surface)
(18) Sanding sheet with hook-and-loop fastening
(19) Front clamping bracket
(20) Sanding sheet clamps (x2)
(21) Rear clamping bracket
(22) Extraction outlet
(23) Dust bag
(24) Adapter for dust bag
a)
(25) Extraction hose
(26) Punch
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Orbital sander
Article number
Rated voltage
A)
No-load speed
A)
No-load orbital stroke rate
Orbit diameter
Sanding plate dimensions
– Square
– Rectangular
– Triangular (sanding sheet
length from corner to
corner)
Weight according to EPTA-
B)
Procedure 01:2014
Recommended ambient
temperature during charging
Permitted ambient temper-
C)
ature during operation and
during storage
Compatible rechargeable
batteries
Bosch Power Tools
GSS 18V-13
3 601 JL0 1..
V= 18
–1
min 6000–10,000
–1
min 12,000–20,000
mm 1.6
mm 100 x 110
mm 80 x 130
mm 100 x 150
kg 1.5 kg (1.5 Ah)–2.6
kg (12.0 Ah Pro-
Core)
°C 0 to +35
°C –15 to +50
GBA 18V...
ProCORE18V...
Orbital sander
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery
GBA 18V 4.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is 70.0 dB(A). Uncertainty K = 3 dB. The noise level
when working can exceed the volume stated. Wear hearing
protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2 2
a = 3.4 m/s , K = 1.5 m/s ,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Rechargeable battery
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
English | 15
GSS 18V-13
ProCORE18V 4.0Ah
GAL 18...
GAX 18...
GAL 36...
1 609 92A 6LL | (23.06.2022)