Publicité
Les langues disponibles
Les langues disponibles
USE
•
Never use pans with a misshapen base. A hollow or rounded base can interfere with
the operation of the overheating protection, so that the appliance becomes too hot.
This may lead to the glass top cracking and the pan base melting. Damage arising
from the use of unsuitable pans or from boiling dry is excluded from the guarantee.
Minimum pan diameter
•
The diameter of the bottom of the pan must be at least 14,5 cm and max. 18 cm. You will
achieve the best results by using a pan with the same diameter as the zone. If a pan is too
small, the zone will not work.
•
The length of a fish-pan (oval pan), used on linked cooking zones, must be at least 22 cm.
Pressure cookers
•
Induction cooking is very suitable for cooking in pressure cookers. The cooking zone reacts
very quickly, and so the pressure cooker is quickly up to pressure. As soon as you switch
a cooking zone Off, the cooking process stops immediately.
Cooking setting
The cooking zones have 9 levels. Beside it there is a 'boost' level (P). Set the cooking level by
touch and slide over the selection bar. At the first touch, the level is set according to the part of
the selection bar that you touch. By slide over the selection bar, the cooking setting is changed.
By move to the right, the level increasing, while moving to the left decreases the level. When you
move your finger away from the selection bar, the cooking zone starts to operate at the level set.
Boost function
•
You can use the 'boost' function to cook at the highest cooking level during a short period of
time (max. 5 minutes). After the maximum boost time the power will be reduced to setting 9.
•
The Boost function is not available when cooking zones are linked!
Boost power management
Cooking zones are networked in pairs (both left and both right cooking zones) to supply the
power for the Boost function. When the Boost function is selected, a proportion of energy is
taken away from the paired cooking zone and the following happens within the pairs:
•
Auto heat-up is deactivated.
•
The cooking setting is reduced. The paired cooking zone can be set maximal to level 5.
The cooking zone, which is set to a lower cooking level, will be flashing in the display.
▷
Pan detection
If the hob does not detect a (ferrous) pan after a pan is placed on a cooking zone, the pan
detection symbol flash in the display. After 10 seconds 'no pan' detection the cooking zone
switches Off.
EN 12
Publicité
