Ancrage De La Structure Du Solarium À La Maison; Procédure Pour La Mise À Niveau; Fastening The Solarium Structure To The House - ZYTCO VISTA ISOPLUS Guide D'installation

Table des Matières

Publicité

ANCRAGE DE LA STRUCTURE DU SOLARIUM À LA
MAISON
Avant d'ancrer la structure du solarium à la maison, il est
primordial qu'elle soit au niveau et d'équerre.
1 - PROCÉDURE POUR LA MISE À NIVEAU
1. Déterminez le point de référence (X). Ce point sera
l'endroit de départ des mesures du solarium. Pour le
déterminer, choisissez sur les meneaux arrières, le point
le plus éloigné de la maison : (D bas) ou (D haut) ou (A
bas) ou (A haut). S'il s'agit d'un coin en haut, projetez-le
au sol. Marquez cet endroit (X) au crayon feutre.
20
FASTENING THE SOLARIUM STRUCTURE TO THE
HOUSE
Before fastening the structure to the house, it is of utmost
importance for it to be squared and leveled.
1 - PROCEDURE TO SQUARE AND LEVEL
1. Determine the reference point (X). This spot will be the
starting point of all the measures of the solarium. To
determine this point, locate the spot that is the farthest
from the house wall on the 2 back-end mullions: (D
bottom) or (D top) or (A bottom) or (A top). If it is at the
top, project it on the ground and mark it (X) with a felt
pen.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vision isoplus

Table des Matières