Analogue Measuring Ranges; Unit; Measurement Mode; Hold Mode «Hold - Hexagon TT20 Mode D'emploi

6.3

Analogue measuring ranges

RANGE
The instruments TT20 and TT60 are equipped with 7 fixed analogue measuring ranges an
one automatic analogue range.
Each key push
RANGE changes the display range.
Range Metric (µm)
measuring range
1 ± 5000 µm
2 ± 2000 µm
3 ± 500 µm
4 ± 200 µm
5 ± 50 µm
6 ± 20 µm
7 ± 5 µm
8
6.4

UNIT

UNIT
The instruments may work either in metric units or as inch units. The conversion is instant
without any effect on the measurement.
Change measuring unit on analogue as also
UNIT
on numerical display.
Example :
6.5 MEASUREMENT Mode; HOLD Mode «HOLD»
HOLD
To enable all measurement modes, the instruments can permanently display the measured
value «Measurement Mode» or hold the value in a desired position «Hold Mode».
Changes from continu-
HOLD
ous measurement mode
into hold mode, the sign
«HOLD» is displayed.
resolution
200 µm
100 µm
20 µm
10 µm
2 µm
1 µm
0.2 µm
Auto Range
1035.8 µm
UNIT
Inch (in)
measuring range
± .200 in
± .100 in
± .020 in
± .010 in
± .002 in
± .001 in
± .0002 in
Auto Range
.040780 in
UNIT
Example :
resolution
.010 in
.005 in
.001 in
.0005 in
.0001 in
.00005 in
.00001 in
67