Error Message; Guarantee - Hexagon TT20 Mode D'emploi

11 ERROR MESSAGE

CAL
(--------)
Red LED
blinking
RS ERROR
Internal error
ERR01
ERR02
ERR03
ERR04
Transmission error
ERR1
Syntax error
ERR21
ERR22
ERR23
ERR24
ERR25
Instrument, internal error
ERR31
ERR32

12 GUARANTEE

We guarantee this instrument against any fault of design, manufacture or material for a
period of 12 months from the date of purchase. Any repair work carried out under the gua-
rantee conditions is free of charge. Our responsibility is limited to the repair of the instru-
ment or, if we consider it necessary, to its free replacement.
The following are not covered by our guarantee: batteries and damage due to incorrect
handling, failure to observe the instruction manual, or attempts by any non-qualified party
to repair the instrument; any consequences whatever which may be connected either
directly or indirectly with the instrument supplied or its use.
82
The unit must be calibrated
Overflow
Function not activate or not accessible
AD channel A: communication error
AD channel B: communication error
AD channel A: working error
AD channel B: working error
Control CHAR not allowed
unknown command
missing parameter
improper parameter
parameter out limit
command partially executed
display function improper
display saturation (>9999.99 or <-9999.99 mm)
(Extract from our General Terms of Delivery, December 1 st , 1981)