Other Functions; Using Optional Equipment; Auxiliary Audio Equipment; Rm-X114 Card Remote Commander - Sony CDX-GT450U Mode D'emploi

Other functions

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
Adjusting the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE/OFF) repeatedly until "AUX"
appears.
After that, "AUX FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Adjust the input level (page 14).
18
Connecting cord*
(not supplied)

RM-X114 Card Remote Commander

The corresponding buttons on the card remote
commander control the same functions as those
on this unit.
DSPL
DSPL
*
MENU
PRESET
SOURCE
SOURCE
</,
–
SEEK
(SEEK –/+ )
SOUND
PRESET –
OFF
OFF
VOL (+/ –)
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
• DSPL (display) button
To change display items.
• SOURCE button
To turn on the power; change the source
(Radio/CD/USB/AUX).
• </, (SEEK –/+) buttons
To control Radio/CD/USB, the same as
(SEEK) –/+ on the unit.
• SOUND button
The same as the select button on the unit.
• OFF button
To turn off the power; stop the source.
• LIST button
To select PTY in RDS.
• M/m (DISC*/PRESET +/–) buttons
To select stored stations (Radio).
To control CD/USB, the same as (1)/(2)
(ALBM –/+) buttons on the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
* Not available for this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE/OFF) on the unit is pressed, or a disc
is inserted to activate the unit first.
MODE
MODE
LIST
+
+
DISC m/M
*
(DISC /
+
SEEK PRESET
+/ –)
–
DISC
*
ENTER
ATT
+ ATT
VOL
–