Publicité
Les langues disponibles
Les langues disponibles
z Switch the mower off when tilting or transporting it, e.g. from/to
the lawn or over paths.
z Take care not to grab running cutters.
z Do not stand in front of the grass ejection opening.
z Before lifting or carrying the mower, switch the motor off and
wait until the cutting tools have come to a standstill.
z Never open the protective cover if the motor is still running.
z Before removing the grass collection device:Switch the motor
off and wait until the cutting tools come to a standstill.After
emptying, fix the grass collection device carefully.
z Never run the mower over gravel– Stones will fly up!
z If possible, do not mow if the grass is wet.
z Under the following conditions the mower must be switched
off, the mains plug must be removed and the mower must
be stationary:
–
adjust the cutting height
–
when leaving the mower
–
when releasing blocked cutters
–
in order to check the mower, to clean it and to work on it
–
if foreign bodies are struck (check first whether the mower
or cutting tools have been damaged. Only then should you
remove the damage).
–
if the mower is vibrating badly because of imbalance (switch
off and look for the cause).
–
if the connection wire is damaged during use.
Assembly
Fixing the grab handle
A
1
Caution!
When collapsing and unfolding the grab handle, the cable
could be damaged.
z Take care that you do not kink the cable.
z See illustrations for assembly.
Operation
Operating times
z Please observe the regional regulations.
z Request the operating times from your local authorities.
Insert the cable into the tension relief unit
z Please insert the cable into the tension relief unit in ac-
cordance with the illustrations
Fit the collecting basket
1
Caution! Rotating cutters
Settings only to be carried out on the mower with the motor
switched off and with the cutting tools at a standstill.
z Only insert the collection basket when your feet are at a
safe distance from the cutting tools.
1. Lift the protection cover.
2. Hang the collection basket in the notches in the chassis (see
arrow) using the hooks.
3. Apply the protection cover.
10
All manuals and user guides at all-guides.com
B
C D
F
.
G
Maintenance
1
Caution! Rotating cutters
Before all maintenance and cleaning tasks:
z Pull the mains plug out.
z Take care not to grab running cutters.
z Check all the visible fixing bolts and nuts regularly for tight-
ness and retighten, particularly those of the cutter beam.
z Do not store the mower in damp rooms.
z For safety reasons, replace worn or damaged parts.
z Use only original WOLF-Garten spare parts, otherwise there is
no guarantee that your mower complies with the safety regulati-
ons.
Disposal
Electrical equipment must not be placed in the
household waste.The unit, accessories and pa-
cking material should be taken to an environment-
friendly recycling unit.
Fitting the collecting basket
1. Insert the projections of the collecting basket upper section
into the openings in the collecting basket lower section.
2. Push the collecting basket upper section evenly onto the coll-
ecting basket lower section.The collecting basket is securely
located as soon as it clicks in position.
Setting the cutting height
1
Caution! Rotating cutters
Settings only to be carried out on the mower with the motor
switched off and with the cutting tools at a standstill.
z switch the motor off and pull the plug out from the mains.
z Unscrew the wheels and set to the correct height
z The wheels must all be at the same cutting height setting!
Cutting height– Grass condition
z Mow when the lawn is dry if possible, to protect the turf. If the
lawn is wet and the grass is long, it may be better to mow with
a higher cutting height.
E
H
J
.
G
Publicité
