Preparation
What you need
Digital Still Camera
Floppy disk (not supplied)
3.5 inch, 2HD (1.44 MB)
Preparation outlines
The clock is not set at the factory. Be sure to set the clock before
using your camera.
1
Charge the battery pack. (p. 9)
2
Install the battery pack. (p. 10)
This camera operates by battery pack. Install a fully charged
battery pack.
3
Set the date and time. (p. 12)
The date and time data are necessary for MS-DOS format
recording. If they are not set, incorrect date and time are
recorded. The CLOCK SET screen appears whenever you turn
on the camera in CAMERA mode.
8-EN
Downloaded from:
https://www.usersmanualguide.com/
Battery pack (NP-F330)
Battery charger (BC-V615)
Pow er cord
Shoulder strap