Self-diagnosis display
The camera has a self-diagnosis
display. This function displays
the camera condition with five-
digits (a combination of a letter
and figures) on the LCD screen.
If this occurs check the
following code chart. The five-
digit display informs you of the
camera current condition. The
last two digits (indicated by
ππ) will differ depending on
the state of the camera.
First three digits
C:32:ππ
C:13:ππ
E:91:ππ
E:61:ππ
Downloaded from:
Cause and/ or Corrective Action
•Trouble is with the disk drive.
nChange the disk. Then turn the power
off and on again.
•The unformatted disk is installed.
nFormat the disk. (p. 33)
•The unusable disk with the camera is
installed.
nChange the disk. (p. 14, 15)
•A camera malfunction which you can not
reverse has occurred.
nContact your Sony dealer or local
authorized Sony service facility and
inform them of the five digits.
(example: E:61:10)
https://www.usersmanualguide.com/
Self-diagnosis display
•C: ππ: ππ
You can reverse the camera
malfunction yourself.
•E: ππ: ππ
Contact your Sony dealer or
local authorized Sony service
facility.
C:32:ππ
41-EN