Publicité
Product appearance is for
reference only and may differ
from the actual product.
Cable Description (Page 2 – A)
Notes:
The cables vary depending on
different camera models.
1. Power Cord: Supports 12 VDC
power supply.
2. Audio Cable: Connect terminal
audio in, audio out and GND.
3. Network Cable: RJ45, Connect the
network interface with network
cable.
Install the Memory Card (Page 2 – B)
Memory card slot
①
Reset button: Press reset button
②
for about 10 s when the camera is
powering on or rebooting to
restore the default settings,
including the user name,
password, IP address, port No.,
etc.
Install the Camera (Page 4 – C)
Remove the installation plate from
the bottom of the camera (C1) and
mount the camera on the ceiling or
wall:
Ceiling mounting (C2.1-2.2)
Wall mounting with bracket
(purchased separately) (C3.1-3.5)
Wall mounting (C4)
Waterproof for Outdoor Installation
(Page 9 – D)
1. Install network cable waterproof
jacket.
2. Use supplied waterproof tape to
protect cable connectors and
unused cables.
Alarm Output (Page 10 – E)
Relay output
①
DC load
②
Power supply
③
④
English
Protective Measures for Outdoor
Installation (Page 10 – F1)
Activate and Access Network
Camera (Page 10 – F2)
© 2022 Hangzhou Hikvision Digital
Technology Co., Ltd.
About this Manual
Pictures, charts, images and all other
information hereinafter are for
description and explanation only.
The information contained in the
Manual is subject to change, without
notice, due to firmware updates or
other reasons. Please find the latest
version in the company website
(https://www.hikvision.com/). Please
use this user manual under the
guidance of professionals.
Trademarks
trademarks and logos are the
properties of Hikvision in various
jurisdictions. Other trademarks and
logos mentioned below are the
properties of their respective
owners.
DISCLAIMER
TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW,
THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE
PROVIDED "AS IS" AND "WITH ALL
FAULTS AND ERRORS". HIKVISION
MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE
USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR
ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS,
11
JQC-3FG Relay
and other Hikvision's
Publicité
