Triangle ELARA Série Mode D'emploi page 30

EN
Connection via an optical cable:
The optical input enables you to connect your ELARA speakers to any audio device with an optical
output: audio player, DVD player, television, etc. To do so:
Î Plug one end of the optical cable into the back of the active speaker in the "OPTICAL" input and
the opposite end into your device.
Î Select the "OPTICAL" input using the remote or the "INPUT" button (volume button) on the
back of the active speaker. (The source selection order is indicated above the "INPUT" button.)
The green LED indicates that the source is actually connected to the "OPTICAL" input. Your
system is ready to operate.
Connection via a coaxial cable:
The coaxial input enables you to connect your ELARA speakers to any audio device with a coaxial
output: CD player, DVD/Blu-ray player, television, etc. To do so:
Î Plug one end of the coaxial cable into the back of the active speaker in the "COAXIAL" input and
the opposite end into your device.
Î Select the "COAXIAL" input using the remote or the "INPUT" button (volume button) on the
back of the active speaker. (The source selection order is indicated above the "INPUT" button.)
The green LED indicates that the source is actually connected to the "COAXIAL" input. Your
system is ready to operate.
Connecting a subwoofer:
The ELARA speakers feature a subwoofer output.
To plug in your subwoofer, use the proper RCA cable. Settings must be made directly from your
subwoofer. (A 60-70 Hz cut-off frequency is recommended.) Check your subwoofer's user guide for
the various setting instructions.
28