NOE Kranbock Notice D'utilisation page 31

12 Checks and maintenance
12.1 General
When checking the NOE-lifting dog, the relevant paragraphs of the latest version of the
accident prevention regulations
equipment used for lifting"must be observed.
Of particular importance are Sections 2.8 3.15.1 "Inspection prior to first use" and
3.15.2 "Scheduled inspections" as well as 3.15.3 "Extraordinary inspections" (each of
these inspections must be carried out by an expert).
DIN 685 Part 5 "Round steel link chains" (Utilisation) also applies.
12.2 Scope
These checking instructions apply for regular repeated checks, or checking after specific
events, of the following load suspension equipment manufactured and sold or hired out
by NOE-Schaltechnik:
Description
Part No.
Max. load capacity
Self-weight
12.3 Purpose
The regular repeated checking of the load suspension equipment assures its operational
safety and reliability and excludes any potential risk of accidents.
The inspections must be carried out at regular intervals (in Germany at least every 12
months).
Depending on the operating conditions, it may be necessary to perform inspections more
frequently.
12.4 Scope of checks
Inspection prior to first use in accordance with DGUV Rules 100-500, Section 2.8 largely
comprises a visual inspection and functional check.
This involves checking the condition of the component and its functional reliability.
Stand: 07/2019
DGUV
Rules 100-500, Section 2.8 "Load suspension
NOE lifting dog
922890
1.5 t
37.5 kg
31