NOE Kranbock Notice D'utilisation page 22

4 Proper use
These operating instructions contain information about the handling and proper use of
the NOE lifting dog.
The lifting dog is a lifting device for repositioning formwork in conjunction with attached
platforms.
The use of this device for handling elements from other formwork
systems is not permitted.
It is used to lift individual NOE formwork elements, or groups of elements linked
sufficiently rigidly from an upright or horizontal position. When horizontal, the front side
of the formwork may be facing either upwards or downwards.
The NOE lifting dog must not be used to reposition damaged
elements and groups of elements that are not linked sufficiently
rigidly!
The elements must only be transported when in an upright suspended position.
The transporting of stacks of elements lying one on top of the other is not permitted.
The NOE lifting dog can be used in ambient temperatures from – 20 °C to + 60 °C.
Only use equipment if it is in perfect condition! Damaged NOE lifting gantries must be
taken out of circulation!
Use only original NOE parts as spares!
Furthermore, the latest version of the relevant national safety regulations must be
complied with (e.g. in Germany, the accident prevention regulations for safety and
health at work, DGUV 100-500, Sec. 2.8 concerning load suspension equipment used for
lifting).
It is strictly forbidden to transport persons on the load or to pass
underneath the suspended load!
Stand: 07/2019 22