Silverline HO0001 009 Mode D'emploi page 25

Fig. 18
Fig. 19
Fig. 20
06.03.2023
Hold the upper flue and take out the flue by removing 2 pieces of
3.5x9.5 screws. Remove the outer flue connection screws and take
the outer flue (Fig. 18).
Disconnect the air outlet pipe connection of the device and remove
the flue adapter if available.
1 - 3.5x9.5 Screw
2 - Flue Connection Plate
Remove the flue connection plates by removing 4 pieces of 3.5x9.5
screws (Fig. 19).
Mount the protection plate included in the package on the air outlet
area with 4 pieces of 3.5x9.5 screws (Fig. 20)
DANGER!
The protection plate should be installed. Other-
wise, an object, items etc. that will fall into the air
outlet of the device may cause damage.
DANGER!
Do not put your hands into this area while the
device is operating. May cause injuries.
ENGLISH
ASSEMBLY OF PRODUCT
Using with the Carbon Filter
25